Factory reference values for anchor drives plus a live calculator. Use the same unit system you select in Energi (ft-lb ÷ psi or Nm ÷ bar).
Energi pressure management
Below is a list of conversion factors for use in the Energi app with Dinamic Oil anchor drives, along with a calculator to help you generate conversion factors for other drives you may own. Please note that volumetric and mechanical efficiencies can significantly affect the output torque of these products, and the Energi pressure management system is not a calibrated torque monitoring device.
High speed
5.06
ft-lb / psi
Low speed
7.19
ft-lb / psi
Torque ÷ pressure (two-speed)
Enter maximum torque and maximum pressure for each speed. Results update as you type.
Low speed
High speed
iExample (imperial): 21,559 ft-lb ÷ 3,000 psi = 7.19 ft-lb/psi (matches TA20 low-speed reference).
Values below are the official Dinamic anchor drive factors. Select units above to highlight the column you will type into Energi.
| Model | Nm / bar | Ft-lb / psi |
|---|---|---|
| SA3 | 25.99 | 1.32 |
| SA5 | 40.15 | 2.04 |
| SA6 | 49.18 | 2.50 |
| SA7 | 58.06 | 2.95 |
| SA8 | 58.06 | 2.95 |
| SA12 | 84.35 | 4.29 |
| SA16 | 112.68 | 5.73 |
| SA20 | 147.60 | 7.51 |
| SA30 | 202.45 | 10.30 |
| Model | Nm / bar (high sp.) | Nm / bar (low sp.) | Ft-lb / psi (high sp.) | Ft-lb / psi (low sp.) |
|---|---|---|---|---|
| TA16 | 75.77 | 113.66 | 3.85 | 5.78 |
| TA20 | 99.57 | 141.32 | 5.06 | 7.19 |
| TA30 | 127.27 | 180.64 | 6.45 | 9.16 |
| TA40 | 176.76 | 265.53 | 8.99 | 13.50 |
| TA60 | 125.32 | 250.64 | 6.37 | 12.75 |
| TA80 | 157.91 | 315.81 | 8.03 | 16.06 |
| TA100 | 205.70 | 411.40 | 10.46 | 20.92 |
| TA200 | 398.68 | 797.35 | 20.27 | 40.55 |
| TA300 | 597.48 | 1,194.95 | 30.38 | 60.77 |
Torque ÷ Pressure = Conversion factor — use the same unit system throughout (ft-lb and psi, or Nm and bar). Enter the result in Energi using the matching convention.
Questions about your drive or Energi setup? Contact application support.
